**Policy, assignments, and
reading guide
TAM 2020, Summer 2011**

**Homework policy: **To get credit, please do these
things on each homework.

a)Hand into TA at start of recitation.

b)On thefirst pageof your homework, please put the following to ease sorting:

On the top left corner

please leave blank

On the top right corner

neatly print your name, course, date, e.g.:Sally Golnaraghi

TAM 2020HW 1, Due June 28, 2011

c)At home, please put aStapleat the top left corner. Folded interlocked corners fall apart. Paperclips fall off.

d)Cite your help.At the top of each problem clearly acknowledge all help you got from TAs, faculty, students, oranyother source (with exceptions for lecture, text and section, which need not be cited). You could write, for example: "Mary Jones pointed out to me that I needed to draw the second FBD in problem 2." or "Nadia Chow showed me how to do problem 3 from start to finish." or "I copied this solution word for word from Jane Lewenstein " or "I found a problem just like this one, number 386.5.6, at cheatonyourhomework.com, and copied it." etc. You will not lose credit for getting and citing such help. Don't violate academic integrity rules:be clear about which parts of your presentation you did not do on your own.Violations of this policy are violations of the Cornell Code of Academic Integrity.

e)Every use of force or moment balance must be associated with a clear correctfree body diagram.Your

f)vector notationmust be clear and correct.Every line of every calculation should be

g)dimensionally correct(carry your units, read Appendix A of online book).Your work should be

h)laid out neatlyenough to be read by someone who does not know how to do the problem. Part of your job as an engineer will be toconvincinglyget the right answers. Your job on the homework is to practice this.

i)Some problems may seem likemake-workbecause you already know how to do them. If so, you can get full credit by writing in full "I can do this problem but don't feel I will gain from writing out the solution" or, in short, "Can do, don't want to." You can keep doing this unless/untill your grader/TA challenges your self-assessment.

j)Computer work should be well commented(sample). Your name should be near the top of the computer text file. Before handing in, you should highlight (or circle with a colored pen) your name on the computer printout. At least some part of any other computer output should also include your name, printed by the computer. Highlight (or circle) your name on each page.

k)At least one problem in each week should be "solutions quality". This should start on a fresh page, use single sides, and not have a new problem start on the same page. It should be self-contained, including, for example, enough of a problem restatment so that a reader need not see the original problem statement. It should be clear and convincing enough so that another TAM 2020 student (who has not done the problem and does not know how to do it) can read your solution, understand it, and judge that it is correct. The first word of this solution should be "SOLUTION". Your solution may be selected for posting (without your name). If you do not want your solution posted, please say so on the top of each homework.

l)Grading and regrading.We have a reasonable homework grading and re-grading policy.

**Study advice: **Try to do assigned homework problems from beginning to
end with no help from book, notes, solutions, people, etc., yourself without
looking up *even one small thing*. Explain, at least outloud to yourself,
every step. If you did need help, then afterwards start the problem over *by
yourself* without looking up even one small thing. Then similarly do other
problems that are like the assigned problems. Then do old prelims and exams.
Finally, for A+ style studying, invent and solve your own problems.

Problems are from RP (Ruina and Pratap) or BJ (Beer and Johnston) unless otherwise specified or written out.

**Mon June 27: 2011, Quiz on VideoNote lecture from Aug 25, 2010.
**Read by Monday June 27: RP pages 14-37

Review by Monday June 27: RP 2.1 (Vector notation and addition). Master Sample 2.1.

(If the numbers of your problems don't look like this, you have the wrong book.)

** June 28: Video from Frid Aug 27**, HW1
Solution

RP 2.2 (dot product), 2.3 (cross
product), 2.4 (moment)

Problems: 2.2.11, 20, 2.3.2,
14, 2.4.13
(Five problems total)

**June 28: Video from Mon Aug 30, **Matlab code from
lecture.

RP 2.5 (Solving vector equations)

Practice (but don't hand in) 2.5.1e, 2d, 3c,
4, 5

Problems: Hand
in 2.5.9 (that's one problem, #9 in section 2.5)

**June 29: Video from Wed Sep 1**

RP 2.6 (Equivalent forces)

Problems: 2.6.8 (all pts of application make angles of 45 degrees
relative to standard axes),

optional challenge: 2.6.16

**June 29: Video from Fri Sep 3**, Matlab code,
HW2Solution

Read by Sept 8 Section RP 3.1 & 3.2 (Free Body Diagrams)

** ** To
supplement readings in RP3.1-2 watch VideoNote ENGRD
2020 Fall 2009, Sept 23.

(Skip
to 2:15. Furthest right distance on bottom of blackboard figure should be d/2.)

This lecture: 2.7, 4.1,
4.2(Center of mass, Equilibrium
of a particle and rigid object)

2.7.11
(the cutout circle is bigger than the picture indicates, its diameter is almost
the radius of the

circular
plate ), 4.1.23,
4.2.14, 22,

**June 30: Video from Wed Sep 8
**RP 4.3 (statics with friction)

Practice 4.4.1 - 9

Problems: 4.3.10, 15, 20

**June 30: Video from Fri Sep 10, **Marked up student solutions
to HW 3 here.**
** Statics w/ friction (cont'd)

Blocks, logs and wheels

**July 1: Lab 1, **read manual and do prelab questions before
the lab.

**July 5: Video from Mon Sep 13
**

Practice 4.5.1 - 4 (that means 4.5.1 and 4.5.2 and 4.5.3 and 4.5.4)

Problems: 4.4.10, 4.5.10 (text error: change IE to CE and change I,C and B to C and B),

4.5.13, 4.5.17

**July 5: Video from Wed Sep 15
**RP 5.1 (Truss, method of joints)

Practice 5.1.1-12

Problems 5.1.13, 21

**July 6: Video from Fri Sep 17
**

Practice 5.2.1-6

Problems 5.2.7 (change the base length AF to 3L, 2L is wrong), 5.2.14,

**July 6: Video from Mon Sep 20** Matlab code**. **

**No
posted solutions** for this week HW, but they are like 5.5.10 below.

** **RP 5.3 (Trusses, computer solution intro)

RP 5.5 (Advanced truss concepts, if you have not taken 2940 skip
things you don't understand)

Problems: 5.3.1, 2, 3

**July 7: Video from Wed Sep 22
**

Problems: 5.3.7 (can you do this without a computer?)

**July 7: Video from Fri
Sep 24** (All of this week's HW due Sat Oct 2 at 10PM)**
**RP 5.3 (Trusses, computer solution)

Problems 5.3.11 a, d (do by hand and compare with the computer solution)

All problems from section 5.3 should be done by computer. At a minimum this would mean using the supplied program and/or writing

**July 8: Video from ****Mon Sep 27
**

Practice: 5.4.1-4

Problems: 5.4.5, 9, 10 , 5.5.10a,d

**July 11: Video from Wed Sep 29
**

Practice 6.1.1 - 6

Problems: 6.1.7, 11, 16, 17

**July 11: Video from Fri Oct 1**

** **RP 6.2 (Force amplification: pulleys, wedges,
levers)

Problems: 6.2.6, 17, 22

**July 12: Video from ** **Mon Oct 4
** RP 6.3 (Mechanisms)

Problems 6.3.2, 6

**July 12: Video from Wed Oct 6
**

6.3.14 (a more clear version of the figure for 6.3.14 is here)

6.3.15, 16

**July 13: Video from Fri Oct 8**: This HW (MWF) due Friday Oct
15 at 10 PM. A two day extension.

** **More on 5.4, 6.1-3 (Frames and mechanisms)

6.2.25, 6.3.11

**July 13: Video from Wed Oct 13
** RP 8.1 (Hydrostatics)

8.1.3, 4, 6 [(a) answer depends on mu, (b) use mu = 0.5], 8

**July 14: Video from Fri Oct 15
**

Problems: 8.5b, 11, 12b,

**July 15: ** Prelim 1, covers through HW handed in on July 13.

**July 18: Video from Mon Oct 18
**

Problems: 8.13, 16

**July 18: Video from Wed Oct 20** Guest
lecturer: Professor Wolfgang
Sachse.

** **BJ 8.8-10 (Stress on crooked planes, general loading,
design)

Problems: 8.25, 29, 31, 8.50a, 8.55a

**July 19: Video from Fri Oct 22 ** Guest lecturer:
Professor Herbert
C.Y. Hui.

BJ 9.1-5 (Axial stress and strain, material properties), see also
RP 7.1

Problems: 9.1, 9.3, 16,

**July 19: Video from ** **Mon Oct 25
** BJ 9.7 (Deformation)

BJ 9.8-9 (Thermal stresses, statically indeterminate problems)

Problems: 9.25, 30, 34

**July 20: Video from Wed Oct 27
**

Problems: 44a, 77, 9.55

**July 20: Video from Fri Oct 29
**

Problems: 10.1, 3, 11c, 51

**July 21: Video from Mon Nov 1
**

Problems: 10.32, 33

**July 22: Lab 2**, read manual and do questions before lab

**July 25: Video from Wed Nov 3
**

Problems: 10.45, 59

---Thurs Nov 4: **Prelim
2**, inclusive through
lecture of Oct 22---

**July 25: Video from Fri Nov 5
**BJ 11.1-3 (Pure bending)

Problems: 11.1, 2, 17, 24a

BJ 11.4 (Stress and deformation in bending)

Problems: 11.23, 97

**July 26: Video from Mon Nov 8
**BJ 11.5 (Bending of composites, rebar)

Problems: 11.25, 11.45

**July 26: Video from Wed Nov 10
**RP 7.1, BJ 12.1-2 (Shear and Bending Moment diagrams)

Practice: RP 7.1.1-3

Problems: RP 7.1.4 (easy), 7.1.17 (harder)

BJ 12.1, 2, 7, 26

**July 27: Video from Fri Nov 12
**BJ 12.3-4 (dM/dx, dV/dx, design of beams)

Problems: 12.29, 35, 47

**July 27: Video from Mon Nov 15
**BJ 13.1-3 (Shear in Beams)

Problems: 12.61, 13.13, 17, 19

**July 28: Video from Wed Nov 17
**BJ 13.4 (Shear in common beams)

Problems: 12.17, 19

**July 29; Prelim 2, **covers through HW handed in July 27, inclusive
of earlier material

**Aug 1: Video from Fri Nov 19 (This week's HW due due Mon Nov 29, 10
PM)
**BJ 15.1-3 (Deflection of Beams)

Problems: 15.1, 2, 4,

**Aug 1: Video from Mon Nov 22
**BJ 15.1-3 (Deflection of Beams)

Problems: 15.12, 18

**Aug 2: Lab 3**, read manual and do pre-lab before the lab

**Aug 3: Video from Wed Nov 24
**BJ 15.5 (Indeterminate beams)

Problems: 15.27

**Aug 3: Video from Mon Nov 29
**BJ 15.6 Superposition for beams

Problems: 15.34

**Aug 4: Video from Wed Dec 1
**BJ 15.7 Superposition and indeterminate beams

Problems: 15.47, 15.59, 15.62

**Aug 5: Video from Frid Dec 3
**Review

**Aug 6: ****Homework
exam** (9 AM - 1 PM)

**Aug 8: Final Exam**, 1:30 - 4:00, Comprehensive. 5 questions.